HID 5422 OMNIKEY® USB Smart Card Reader
Specifications
Connection:
USB
Compatibility:
iCLASS Seos®, HID Prox®, iCLASS SE®, MIFARE Classic®, MIFARE® DESFire® EV1
Downloads
HID OMNIKEY® Smart Card Reader.
HID OMNIKEY® Card Reader is a dual-interface, PC-linked reader that combines contact and contactless technology to allow secure access control.
Easy to install, the HID OMNIKEY® Reader features a USB connection and uses the native CCID driver from the operating system, ensuring no additional driver installation is required.
Supporting a wide range of contact and contactless smart card technologies, the HID OMNIKEY® Reader also supports mobile access, with bluetooth connection.
Cable Type:
USB
Media Supported:
Contactless
Wireless Technology:
Bluetooth
Operating Range:
70mm
Compatibility:
iCLASS Seos®, HID Prox®, iCLASS SE®, MIFARE®, MIFARE® DESFire®
Dimensions:
0.62in x 3.6in x 2.79in
- HID OMNIKEY® Dual Interface Smart Card Reader
HID Common FAQs
Get answers to common questions about the HID range.
Are all HID products custom programmed?
Yes. We will need your specific system programming information in order to complete your order and provide the correct cards, fobs, or reader.
What information do I need to provide?
What is the ordering process?
Simply select the quantity you require and check out as normal. As soon as we receive your order we’ll be in touch to gather the necessary details from you to generate the full part number and programming details.
I don’t know my programming details, what should I do?
If you have an existing box of cards or fobs, or still have the box for your reader, have a look for a label on the side or the back. This will contain a series of numbers and letters. It may be easier to take a photograph of the label and send us this.
If you don’t have a box, look to see if there’s any information on the reader on the wall.
Failing that, you can send us one of your existing cards and we can forward this onto HID for confirmation of your programming details.
Can I print on my HID cards using my own card printer?
All blank access cards can be personalised using an ID Card Printer.
We recommend a retransfer printer to ensure there is no damage to the chip, however it is also possible to run them through a direct-to-card printer if you avoid printing on the raised chip area of the card.