650653

IDP Smart 650653 Black Ribbon, 1200 Prints

£22.95 (£27.54 inc VAT)
Shipping calculated at checkout.
IDP Smart Black Ribbon, designed for use with the IDP Smart 30 and IDP Smart 50 ID Card Printers. Capable of 1200 prints, the IDP Smart Monochrome Ribbon is perfect for high-volume printing, producing detailed text, line art and barcodes on cards, whilst also including a cleaning roller to ensure a consistent print.
Printer Compatibility
  • IDP Smart 30 ID Card Printer
  • IDP Smart 50 ID Card Printer

IDP Smart Black Printer Ribbon.

IDP Smart Black Printer Ribbon designed for use with the IDP Smart 30 and IDP Smart 50 ID Card Printers.

Ideal for high volume printing, the IDP Smart Black Ribbon is capable of 1,200 prints per-roll, perfect for printing detailed text, barcodes and line art on printed cards.

The IDP Smart Monochrome Ribbon is suitable for membership card and gift card printing, where photo identification is not required.

IDP Smart 650653 works with:

  • IDP Smart 30 ID Card Printer
  • IDP Smart 50 ID Card Printer
  • IDP Smart Black Printer Ribbon
  • Cleaning Roller

Card Printer Ribbons Common FAQs

Get answers to common questions about ID Card Printer Ribbons.

What do the letters mean on a printer ribbon?

Card Printer Ribbons are made up of panels of colour and each panel is represented by a letter. These mean:

Y = Yellow
M = Magenta
C = Cyan
K = Black
O = Clear protective overlay that adds a thin layer of protection onto your cards.

Plastic card printers mix all of the YMC and K panels together to create all colours in the spectrum.

Most printer ribbons are YMCKO as this suits most people’s printing needs.

I’m printing in black only, do I need a YMCKO ribbon?

No. If you’re only printing in black onto your cards (for example text only or barcode) it is far cheaper to print using a black-only ribbon.

This has one panel and represents considerable cost savings when compared to a full colour ribbon.

When should I choose a YMCKOK ribbon over a YMCKO?

If you have a double-sided printer and are printing full colour on the front of your cards and black-only on the reverse, it is much cheaper to do so using a YMCKOK ribbon.

The extra ‘K’ on the end of the code stands for an extra black panel that prints on the reverse of the card at the same time as full colour prints onto the front.

Will a YMCKOK ribbon work on a single sided card printer?

No, it will only work in a double-sided card printer.

The extra ‘K’ on the end of the code stands for an extra black panel that prints on the reverse of the card at the same time as full colour prints onto the front.

Should I clean my card printer when I change the ribbon?

ID Card Printer manufacturers recommend you run a cleaning cycle every time you change the ribbon in order to keep the printer running smoothly, and then do a deep clean once in a while.

Most ribbons come with a cleaning roller in the box.

Why should I shred my printer ribbon after use?

If you’re using a Direct to Card printer (which the majority of printers on the market are), the ribbon retains an imprint of the data on the card after printing.

So, if you’re printing an ID card with a photograph for example, all of this data will be left behind on the ribbon afterwards. That’s why it’s really important to shred your printer ribbon securely when you replace it with a new one for data protection.

Will any of these ribbons work with my printer?

No. It’s really important you check the compatibility of each printer ribbon to check it will work with your specific model.

Don’t assume that a Magicard ribbon will work in all Magicard printers for example, it will be designed to work in a specific printer model only.