45200

HID Fargo 45200 YMCKO Colour Ribbon, 500 Prints

£83.85 (£100.62 inc VAT)
Shipping calculated at checkout.
HID Fargo YMCKO Colour Ribbon, designed for use with the HID Fargo DTC4500 & DTC4500e ID Card Printers. Capable of printing up to 500 cards, the HID Fargo YMCKO Ribbon features a transparent overlay that protects printed cards against everyday wear and tear.
Printer Compatibility
Downloads

HID Fargo YMCKO Colour Printer Ribbon.

HID Fargo YMCKO Full Colour Printer Ribbon, designed for use with the HID Fargo DTC4500 and DTC4500e ID Card Printers.

Capable of 500 prints per-roll, the HID Fargo Colour Ribbon contains four vibrant panels to produce colour-rich membership cards, event badges, visitor passes and more.

The HID Fargo 45200 Ribbon contains an overlay panel that adds a layer of protection, shielding printed cards from daily wear and tear.

HID Fargo 45200 works with:

  • HID Fargo YMCKO Colour Printer Ribbon

Card Printer Ribbons Common FAQs

Get answers to common questions about ID Card Printer Ribbons.

What do the letters mean on a printer ribbon?

Card Printer Ribbons are made up of panels of colour and each panel is represented by a letter. These mean:

Y = Yellow
M = Magenta
C = Cyan
K = Black
O = Clear protective overlay that adds a thin layer of protection onto your cards.

Plastic card printers mix all of the YMC and K panels together to create all colours in the spectrum.

Most printer ribbons are YMCKO as this suits most people’s printing needs.

I’m printing in black only, do I need a YMCKO ribbon?

No. If you’re only printing in black onto your cards (for example text only or barcode) it is far cheaper to print using a black-only ribbon.

This has one panel and represents considerable cost savings when compared to a full colour ribbon.

When should I choose a YMCKOK ribbon over a YMCKO?

If you have a double-sided printer and are printing full colour on the front of your cards and black-only on the reverse, it is much cheaper to do so using a YMCKOK ribbon.

The extra ‘K’ on the end of the code stands for an extra black panel that prints on the reverse of the card at the same time as full colour prints onto the front.

Will a YMCKOK ribbon work on a single sided card printer?

No, it will only work in a double-sided card printer.

The extra ‘K’ on the end of the code stands for an extra black panel that prints on the reverse of the card at the same time as full colour prints onto the front.

Should I clean my card printer when I change the ribbon?

ID Card Printer manufacturers recommend you run a cleaning cycle every time you change the ribbon in order to keep the printer running smoothly, and then do a deep clean once in a while.

Most ribbons come with a cleaning roller in the box.

Why should I shred my printer ribbon after use?

If you’re using a Direct to Card printer (which the majority of printers on the market are), the ribbon retains an imprint of the data on the card after printing.

So, if you’re printing an ID card with a photograph for example, all of this data will be left behind on the ribbon afterwards. That’s why it’s really important to shred your printer ribbon securely when you replace it with a new one for data protection.

Will any of these ribbons work with my printer?

No. It’s really important you check the compatibility of each printer ribbon to check it will work with your specific model.

Don’t assume that a Magicard ribbon will work in all Magicard printers for example, it will be designed to work in a specific printer model only.