525100-005

Entrust 525100-005 YMCKT-KT Colour Ribbon, 350 Prints

£157.30 (£188.76 inc VAT)
Shipping calculated at checkout.
Entrust Sigma DS YMCKT-KT Full Colour Double Sided Printer Ribbon, designed for use with the Entrust Sigma DS2 and DS3 ID Card Printers. Manufactured for double sided printing, the Entrust YMCKT-KT Printer Ribbon is a seven panel ribbon that features two topcoats to protect both sides of the card.
Printer Compatibility
Downloads

Entrust YMCKT-KT Colour Printer Ribbon.

Entrust Sigma Colour Printer Ribbon, designed for printing full-colour, double-sided printed cards from the Entrust Sigma ID Printer range.

Capable of 350 prints, the Entrust YMCKT-KT Colour Ribbon contains a protective topcoat that enhances card protection, shielding printed cards from daily wear and tear.

The Entrust Colour Printer Ribbon come with a cleaning card and roller, ensuring ribbon replacement is convenient and effective.

Entrust 525100-005 works with:

  • Entrust YMCKT-KT Colour Printer Ribbon
  • Cleaning Card
  • Cleaning Roller

Card Printer Ribbons Common FAQs

Get answers to common questions about ID Card Printer Ribbons.

What do the letters mean on a printer ribbon?

Card Printer Ribbons are made up of panels of colour and each panel is represented by a letter. These mean:

Y = Yellow
M = Magenta
C = Cyan
K = Black
O = Clear protective overlay that adds a thin layer of protection onto your cards.

Plastic card printers mix all of the YMC and K panels together to create all colours in the spectrum.

Most printer ribbons are YMCKO as this suits most people’s printing needs.

I’m printing in black only, do I need a YMCKO ribbon?

No. If you’re only printing in black onto your cards (for example text only or barcode) it is far cheaper to print using a black-only ribbon.

This has one panel and represents considerable cost savings when compared to a full colour ribbon.

When should I choose a YMCKOK ribbon over a YMCKO?

If you have a double-sided printer and are printing full colour on the front of your cards and black-only on the reverse, it is much cheaper to do so using a YMCKOK ribbon.

The extra ‘K’ on the end of the code stands for an extra black panel that prints on the reverse of the card at the same time as full colour prints onto the front.

Will a YMCKOK ribbon work on a single sided card printer?

No, it will only work in a double-sided card printer.

The extra ‘K’ on the end of the code stands for an extra black panel that prints on the reverse of the card at the same time as full colour prints onto the front.

Should I clean my card printer when I change the ribbon?

ID Card Printer manufacturers recommend you run a cleaning cycle every time you change the ribbon in order to keep the printer running smoothly, and then do a deep clean once in a while.

Most ribbons come with a cleaning roller in the box.

Why should I shred my printer ribbon after use?

If you’re using a Direct to Card printer (which the majority of printers on the market are), the ribbon retains an imprint of the data on the card after printing.

So, if you’re printing an ID card with a photograph for example, all of this data will be left behind on the ribbon afterwards. That’s why it’s really important to shred your printer ribbon securely when you replace it with a new one for data protection.

Will any of these ribbons work with my printer?

No. It’s really important you check the compatibility of each printer ribbon to check it will work with your specific model.

Don’t assume that a Magicard ribbon will work in all Magicard printers for example, it will be designed to work in a specific printer model only.